مجموعة كرنك دراجة بمحرك حزام HTD 170M كامل CNC مقاس 8 مم

Introducing the 170mm Full CNC HTD 8M Belt Drive Bicycle Crankset, a precision-crafted upgrade for your bike. With a 170mm crank arm length, this crankset offers optimal leverage and power transfer. The full CNC machined construction ensures durability and precision, while the HTD 8M belt drive system provides smooth and efficient power transmission. Suitable for both road and mountain biking, this crankset offers a sleek and modern look, enhancing the performance and aesthetics of your bike. Upgrade your ride with the 170mm Full CNC HTD 8M Belt Drive Crankset and experience the difference in power and performance.

Q: Which models are suitable for use? As mentioned above, the belt drive is suitable for "stable kinetic energy transmission", so it is not suitable for mountain bikes with more road conditions and unstable pedaling force; and the pedaling force is more stable output such as city cars, station wagons, public bicycles. , baby carriage, etc., you can enjoy the advantages of high durability and less maintenance. Q: Can I use a belt drive for every car? Since the belt cannot be cut off, the frame must have an opening device, so that there is a way to install the belt, so the frame design will be different, and the general frame cannot modify the belt transmission. In addition, the belt drive must be driven by the internal shifting system, so the frame design must also be able to install the internal shifting hub. Q: Will the belt be cut off? Many riders with amazing feet may be worried, is it possible to break the belt? In fact, high-strength carbon fiber belts are used from 150 horsepower motorcycle engines to 6,000 horsepower racing engines. If the maximum speed of the Tourman's sprint is 2 horsepower, the strength and durability are natural. Absolutely no problem. Q: Will there be slipping when stepping on? If the vehicle is not accurate enough, the belt tension is insufficient. When the belt slides over the teeth, it may cause the teeth to jump; if the tension is too large, the resistance will increase and the wear will be accelerated. Of course, if the car is shipped from the factory, after the tension is measured, the tension value falls within the appropriate range, and the gear will not slip and jump when driving, so the car should be carefully selected. Q: How to maintain the belt? The belt does not need any grease, so you only need to wipe the surface with water. After riding, take the car to a cool place and avoid direct sunlight for a long time to extend the life of the belt system. Although the price of the belt itself is about the same as that of the high-end chain of each brand, it is more cost-effective because it is more durable and used longer.